[quagga-dev 5933] Re: Feedback on patches?
joakim.tjernlund at transmode.se
Tue Sep 9 08:33:45 BST 2008
On Mon, 2008-09-08 at 06:52 +0000, Daniel Ng wrote:
> Joakim Tjernlund <joakim.tjernlund <at> transmode.se> writes:
> > > 2) Static Routes don't seem to be propagated. They appear in the routing
> > > of the originating node, but they don't appear in any of the other nodes.
> If I
> > > roll back to the original 0.99.10, this problem disappears. Therefore it
> > > not a config problem.
> > Hmm, don't think thats due to Unnumbered. Can can you test with current
> > Quagga master?
> I did, and now the problem is not showing itself anymore. I fear this is an
> intermittent bug, probably unrelated to your changes. I'm trying to reproduce
> > Where is your Unnumbered config?
> > all ppp/hdlc i/f's should have "unnumberd" on them.
> > You should loose the "network 0.0.0.0/0 area 0.0.0.0"
> > and use the "ip ospf area 0.0.0.0" command:
> > Some thing like:
> > !
> > interface ppp0
> > ip ospf area 0.0.0.0
> > unnumbered
> No, I can't do this in ospfd. Currently, 'unnumbered' can only be set in
> zebra, not ospfd. Is this the intention of the patches?
Ahh, didn't see that the config only was for ospf. I usally
do show running-config and then you get all config
> > The non-unnumberd i/f's should just have the
> > "ip ospf area 0.0.0.0"
> > Remove passive on all i/f's too
> Ok, this is fine:
Yes, looks OK. Curious though, do you really need to specify
"multicast" for the ppp I/F's?
More information about the Quagga-dev