[quagga-dev 6494] Re: adding routes via interface bug in FreenBSD

S.I piston at otel.net
Thu Mar 26 17:10:11 GMT 2009


If You haven't used such setups it will be too long to explain (which isn't the idea of the whole thread). And yes I need quagga to be able do those trivial things (which were actualy working in the past). 

On Thu, 26 Mar 2009 12:18:05 -0400
Greg Troxel <gdt at ir.bbn.com> wrote:

> 
> "S.I" <piston at otel.net> writes:
> 
> > Hello, 
> >  As of quagga-0.99.3_2 zebra doesn't add static routes via interface on any freebsd versions from 6-STABLE to FreeBSD 7.2-PRERELEASE #3: Wed Mar 25 11:38:45 EET 2009.
> >
> > Here is the example:
> > #####################################################################################
> > zebra.conf
> > interface vlan11
> > ip route 10.10.0.0/16 vlan11
> > ----------------------------
> > #ifconfig vlan11
> >
> > vlan11: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
> > 	options=3<RXCSUM,TXCSUM>
> > 	ether 00:04:23:a7:60:48
> > 	inet 172.16.16.1 netmask 0xffffffff broadcast 172.16.16.1
> > 	media: Ethernet autoselect (1000baseTX <full-duplex>)
> > 	status: active
> > 	vlan: 11 parent interface: em0
> 
> So are you trying to have 10.10.0.0/16 as an overlay subnet on vlan11?
> If not, to which remote host are you sending that traffic?  Why do you
> have a /32 configured, with broadcast addr = host addr?
> 
> I have static routes in quagga 0.99.11 on NetBSD, and it works fine.
> But I'm sending a /32 address to a particular remote host that has an
> address within the prefix that the interface is configured for.
> 



More information about the Quagga-dev mailing list