[quagga-dev 8719] ospfd+freebsd 8.2

Vitaly Liaschuk larinus at gmail.com
Wed May 4 10:56:19 BST 2011


Hi, list!
	I'm trying to configure ospfd on my freebsd server. Here is my
	config:
BRAS10# sh run
Building configuration...

Current configuration:
!
hostname zebra
log file /usr/local/etc/quagga/zebra.log
hostname bras10
log file /usr/local/etc/quagga/ospfd.log
!
password 123
enable password 123
!
interface em0
 ip ospf cost 65
 ip ospf dead-interval 8
 ip ospf hello-interval 2
 link-detect
 multicast
 no ipv6 nd suppress-ra
!
interface ipfw0
 ipv6 nd suppress-ra
!
interface lo0
!
interface re0
 ipv6 nd suppress-ra
!
router ospf
 ospf router-id 172.22.1.10
 redistribute connected
 passive-interface default
 no passive-interface em0
 network 172.22.1.0/24 area 0.0.0.0
 neighbor 172.22.1.5
!
ip route 0.0.0.0/0 212.98.173.1
ip route 10.0.0.0/8 Null0 254
ip route 172.16.0.0/12 Null0 254
ip route 192.168.0.0/16 Null0 254
!
ip forwarding
!
line vty
!
end

In my configuration I turned on ospf on em0 interface. In google I  found assumption what it's could occure because  zebrad do not
gives active interfaces to the ospfd. 

NAS10# ls -la /var/run/quagga/
total 8
drwxrwxrwx  2 quagga  quagga  512 May  4 12:21 .
drwxr-xr-x  6 root    wheel   512 May  4 12:21 ..
-rw-r--r--  1 quagga  quagga    4 May  4 12:21 ospfd.pid
srwxrwx---  1 quagga  quagga    0 May  4 12:21 ospfd.vty
-rw-r--r--  1 quagga  quagga    4 May  4 12:21 zebra.pid
srwxrwx---  1 quagga  quagga    0 May  4 12:21 zebra.vty
srwx------  1 quagga  quagga    0 May  4 12:21 zserv.api

I tried recompile quagga with option WITH_TCPSOCKETS, but it did not
help:

NAS10# sh ip o i em0
em0 is up
  ifindex 1, MTU 1500 bytes, BW 0 Kbit <UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
  OSPF not enabled on this interface
NAS10# 


So, maybe it is a freebsd specific  bug? Can anyone confirm this?



More information about the Quagga-dev mailing list