[quagga-dev 11071] Re: ospf6d: Multiple Instance ID's over a single interface

Kanchan Gupta1 kanchan.gupta1 at tcs.com
Mon Mar 3 12:07:46 GMT 2014


Hi Tom,

Thanks for the information.

Thanks and regards,
Kanchan Gupta


-----"Goff, Thomas" <Thomas.Goff at boeing.com> wrote: -----
To: Kanchan Gupta1 <kanchan.gupta1 at tcs.com>, "quagga-dev at lists.quagga.net" <quagga-dev at lists.quagga.net>
From: "Goff, Thomas" <Thomas.Goff at boeing.com>
Date: 02/27/2014 12:38AM
Cc: Jyotsna Priya1 <jyotsna.priya1 at tcs.com>, Deepankar Gupta	<deepankar.gupta at tcs.com>
Subject: RE: [quagga-dev 11061] ospf6d: Multiple Instance ID's over a single	interface

As far as I know, the Quagga OSPFv3 implementation does not support using multiple instances.

The Mobile Routing variant of Quagga (http://www.nrl.navy.mil/itd/ncs/products/ospf-manet) includes support for RFC 5838 as well as some other enhancements.  The release notes give an overview of the current status:

	http://downloads.pf.itd.nrl.navy.mil/ospf-manet/quagga-0.99.21mr2.2/RELEASE_NOTES.MobileRouting

  Tom

> -----Original Message-----
> From: Kanchan Gupta1 [mailto:kanchan.gupta1 at tcs.com]
> Sent: Wednesday, February 26, 2014 4:02 AM
> To: quagga-dev at lists.quagga.net
> Cc: Jyotsna Priya1; Deepankar Gupta
> Subject: [quagga-dev 11061] ospf6d: Multiple Instance ID's over a
> single interface
> 
> Hi All,
> 
> Can anybody please tell me how we can run multiple instances of OSPFv3
> over a single interface. I am confused with instance ID, as I am
> running one instance between two machines having instance Id= 0, now I
> want to run one more instance between the same machines and on the same
> interface that should have instance Id =1. How can i do it?
> 
> Following are the settings in the configuration file :
> 
> ospf6d at plant(config)# interface eth0
> ospf6d at plant(config-if)# ipv6 ospf6 instance-id 0
> 
> Output to CLI:
> Hello received on eth0
> 2014/02/26 15:36:16 OSPF6:     src: fe80::20c:29ff:fea7:da08
> 2014/02/26 15:36:16 OSPF6:     dst: ff02::5
> 2014/02/26 15:36:16 OSPF6:     OSPFv3 Type:1 Len:40 Router-
> ID:10.10.10.2
> 2014/02/26 15:36:16 OSPF6:     Area-ID:10.10.10.0 Cksum:9491 Instance-
> ID:0
> 2014/02/26 15:36:16 OSPF6:     I/F-Id:2 Priority:1 Option:--|R|-|--
> |E|V6
> 2014/02/26 15:36:16 OSPF6:     HelloInterval:10 DeadInterval:40
> 2014/02/26 15:36:16 OSPF6:     DR:10.10.10.2 BDR:10.10.10.1
> 2014/02/26 15:36:16 OSPF6:     Neighbor: 10.10.10.1
> 2014/02/26 15:36:16 OSPF6: Neighbor Event 10.10.10.2%eth0:
> *HelloReceived*
> 
> here the Instance ID is 0 that I have assigned.
> 
> I have one more question as I am working on RFC 6969 i.e. OSPFv3
> Instance ID Address Family Values Registry Update, do I need to
> implement RFC 5838 before implementing RFC6969(I have Quagga-0.99.22.3
> version).
> 
> Thanks and regards,
> Kanchan Gupta
> 
> =====-----=====-----=====
> Notice: The information contained in this e-mail
> message and/or attachments to it may contain
> confidential or privileged information. If you are
> not the intended recipient, any dissemination, use,
> review, distribution, printing or copying of the
> information contained in this e-mail message
> and/or attachments to it are strictly prohibited. If
> you have received this communication in error,
> please notify us by reply e-mail or telephone and
> immediately and permanently delete the message
> and any attachments. Thank you
> 
> 
> 
> 
> _______________________________________________
> Quagga-dev mailing list
> Quagga-dev at lists.quagga.net
> https://lists.quagga.net/mailman/listinfo/quagga-dev




More information about the Quagga-dev mailing list