[quagga-dev 16695] Re: quagga route shows inactive
Joakim.Tjernlund at infinera.com
Thu Dec 28 05:24:37 GMT 2017
On Thu, 2017-12-28 at 10:37 +0530, Siva Prasad wrote:
> CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
> Hi Team
> When quagga received routes , it marked as inactive.
> Following is the route table in vtysh
> root at router0D1E0F:~# vtysh
> Hello, this is Quagga (version 0.99.22.4).
> Copyright 1996-2005 Kunihiro Ishiguro, et al.
> router0D1E0F# show ip route
> Codes: K - kernel route, C - connected, S - static, R - RIP,
> O - OSPF, I - IS-IS, B - BGP, H - HSLS, o - OLSR,
> b - BATMAN, A - Babel,
> > - selected route, * - FIB route
> K * 0.0.0.0/0 via 192.168.11.1, eth0 inactive
Looks like you set def. gateway outside Q. Do a static def. route from zebra cli instead.
> R>* 10.207.241.0/24 [120/2] via 192.168.1.5, eth2.1, 13:24:19
> C>* 127.0.0.0/8 is directly connected, lo
> R>* 169.254.0.0/16 [120/2] via 192.168.1.5, eth2.1, 13:24:19
> C>* 192.168.1.0/24 is directly connected, eth2.1
> K * 192.168.11.0/24 is directly connected, eth0
> C>* 192.168.11.0/24 is directly connected, eth0
> K>* 192.168.11.1/32 is directly connected, eth0
> R 192.168.111.0/24 [120/2] via 192.168.11.1 inactive, 00:00:49
> What can be the issue ?
> Any help is highly appreciated.
> Quagga-dev mailing list
> Quagga-dev at lists.quagga.net
More information about the Quagga-dev