[quagga-users 133] Re: config used to wrk in 0.93b doesnt in 0.94-20030807

Ted Mittelstaedt tedm at toybox.placo.com
Sat Aug 9 01:53:30 IST 2003


We use this as well, with a terminal server but I would hardly
call it a cool concept.  It's actually ugly IMHO because the
terminal server is too stupid to drop an incoming packet directed
to an IP number that is no longer in service.

Ted


>-----Original Message-----
>From: Anthony.Golia at morganstanley.com
>[mailto:Anthony.Golia at morganstanley.com]
>Sent: Friday, August 08, 2003 11:29 AM
>To: Ted Mittelstaedt
>Cc: quagga-users at lists.quagga.net
>Subject: Re: [quagga-users 105] Re: config used to wrk in 0.93b doesnt
>in 0.94-20030807
>
>
>I hope not, it's a cool concept and i need it.
>
>Ted Mittelstaedt wrote:
>> I've run into this same problem with the routed under FreeBSD,
>> it doesen't want to advertise routes using a /32 subnet either.
>> Cisco IOS does advertise such routes.  Perhaps this is a
>> non-standard change to the RIP standard?
>> 
>> Ted
>> 
>> 
>>>-----Original Message-----
>>>From: quagga-users-bounces at lists.quagga.net
>>>[mailto:quagga-users-bounces at lists.quagga.net]On Behalf Of
>>>Anthony.Golia at morganstanley.com
>>>Sent: Thursday, August 07, 2003 7:09 AM
>>>To: quagga-users at lists.quagga.net
>>>Subject: [quagga-users 93] config used to wrk in 0.93b doesnt in
>>>0.94-20030807
>>>
>>>
>>>got:
>>>
>>>saias12 / 147# ip addr show
>>>1: lo: <LOOPBACK,NOARP,UP> mtu 16436 qdisc noqueue
>>>    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>>>    inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
>>>    inet 172.31.254.254/32 brd 127.255.255.255 scope global lo:1
>>>2: eth0: <BROADCAST,MULTICAST,NOTRAILERS,UP> mtu 1500 qdisc pfifo_fast 
>>>qlen 100
>>>    link/ether 00:50:8b:75:f7:58 brd ff:ff:ff:ff:ff:ff
>>>    inet 172.31.245.41/24 brd 172.31.245.255 scope global eth0
>>>3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 100
>>>    link/ether 00:50:8b:75:f7:57 brd ff:ff:ff:ff:ff:ff
>>>    inet 172.31.246.41/24 brd 172.31.246.255 scope global eth1
>>>
>>>wanna advertise just 172.31.254.254/32 out *both* eth0 and eth1 
>via ripv2.
>>>
>>>got:
>>>
>>>saias12 / 148# cat /etc/zebra.conf
>>>
>>>log file /var/log/zebra.log
>>>debug zebra events
>>>debug zebra kernel
>>>password password
>>>
>>># static route for VIP out all ints
>>>
>>>ip route 172.31.254.254/32 eth0
>>>ip route 172.31.254.254/32 eth1
>>>
>>>saias12 / 149# cat /etc/ripd.conf
>>>
>>>log file /var/log/ripd.log
>>>password password
>>>debug rip zebra
>>>interface eth0
>>>interface eth1
>>>
>>>router rip
>>>	timers basic 20 40 60
>>>	redistribute static
>>>	redistribute connected
>>>	network eth0
>>>	network eth1
>>>	distribute-list in in eth0
>>>	distribute-list out out eth0
>>>	distribute-list in in eth1
>>>	distribute-list out out eth1
>>>
>>>access-list in deny any
>>>access-list out permit 172.31.254.254/32
>>>access-list out deny any
>>>
>>>line vty
>>>
>>>any help is appreciated.
>>>
>>>
>>>-- 
>>>Cheers,
>>>Anthony
>>>
>>>_______________________________________________
>>>Quagga-users mailing list
>>>Quagga-users at lists.quagga.net
>>>http://lists.quagga.net/mailman/listinfo/quagga-users
>>>
>> 
>> _______________________________________________
>> Quagga-users mailing list
>> Quagga-users at lists.quagga.net
>> http://lists.quagga.net/mailman/listinfo/quagga-users
>> 
>> 
>
>
>-- 
>Cheers,
>Anthony
>
>


More information about the Quagga-users mailing list