[quagga-users 147] Re: config used to wrk in 0.93b doesnt in 0.94-20030807

Anthony.Golia at morganstanley.com Anthony.Golia at morganstanley.com
Mon Aug 11 10:58:01 IST 2003


Paul Jakma wrote:
> On Thu, 7 Aug 2003 Anthony.Golia at morganstanley.com wrote:
> 
> 
>>got:
>>
>>saias12 / 147# ip addr show
>>1: lo: <LOOPBACK,NOARP,UP> mtu 16436 qdisc noqueue
>>     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>>     inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
>>     inet 172.31.254.254/32 brd 127.255.255.255 scope global lo:1
>>2: eth0: <BROADCAST,MULTICAST,NOTRAILERS,UP> mtu 1500 qdisc pfifo_fast 
>>qlen 100
>>     link/ether 00:50:8b:75:f7:58 brd ff:ff:ff:ff:ff:ff
>>     inet 172.31.245.41/24 brd 172.31.245.255 scope global eth0
>>3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 100
>>     link/ether 00:50:8b:75:f7:57 brd ff:ff:ff:ff:ff:ff
>>     inet 172.31.246.41/24 brd 172.31.246.255 scope global eth1
>>
>>wanna advertise just 172.31.254.254/32 out *both* eth0 and eth1 via ripv2.
>>
>>got:
>>
>>saias12 / 148# cat /etc/zebra.conf
>>
>>log file /var/log/zebra.log
>>debug zebra events
>>debug zebra kernel
>>password password
>>
>># static route for VIP out all ints
>>
>>ip route 172.31.254.254/32 eth0
>>ip route 172.31.254.254/32 eth1
>>
>>saias12 / 149# cat /etc/ripd.conf
>>
>>log file /var/log/ripd.log
>>password password
>>debug rip zebra
>>interface eth0
>>interface eth1
>>
>>router rip
>>	timers basic 20 40 60
>>	redistribute static
>>	redistribute connected
>>	network eth0
>>	network eth1
>>	distribute-list in in eth0
>>	distribute-list out out eth0
>>	distribute-list in in eth1
>>	distribute-list out out eth1
>>
>>access-list in deny any
>>access-list out permit 172.31.254.254/32
>>access-list out deny any
>>
>>line vty
>>
>>any help is appreciated.
> 
> 
> can you give more details? what happens?
> 
> and the access-list? is that right? should it not be a prefix-list? 
> (never used ripd - but generally prefix-list's filter routes, 
> access-list filter connections to the router).
> 
> regards,

thx for the response.  i want to filter routes, i guess i'll look into 
prefix-list, anyway, it just doesn't advert any routes, even if i remove 
the access-list/ distribute-list lines.  the same config averts the /32 
IP RIP route out eth0 and eth1.


-- 
Cheers,
Anthony



More information about the Quagga-users mailing list