[quagga-users 6711] Re[2]: OSPF not enabled on this interface

Dmitriy Gorbenko bazil at profi.kharkov.ua
Thu Apr 6 12:19:44 IST 2006

Andrew J. Schorr wrote:
> On Thu, Apr 06, 2006 at 06:54:50AM +0000, Dmitriy Gorbenko wrote:
>> pegas# show ip ospf interface fxp0
>> fxp0 is down
>>  ifindex 0, MTU 0 bytes, BW 0 Kbit   <>
>>  OSPF not enabled on this interface
>> -----------------------------------------------------------------------------------------
>> And I have reasonable question: Why OSPF not enabled on fxp0 interface ?
>> Thanks for helping me.
> It seems that ospfd believes the interface is down.
> What is the output from "ifconfig fxp0"?  And please post the
> output from the zebra command "show interface fxp0".
> Regards,
> Andy
here whey are:

root at pegas# ifconfig fxp0
        inet6 fe80::2a0:c9ff:fe42:b8e9%fxp0 prefixlen 64 scopeid 0x1
        inet netmask 0xffffff00 broadcast
        ether 00:a0:c9:42:b8:e9
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
root at pegas# telnet localhost zebra
Trying ::1...
telnet: connect to address ::1: Connection refused
Connected to localhost.
Escape character is '^]'.

Hello, this is Quagga (version 0.99.3).
Copyright 1996-2005 Kunihiro Ishiguro, et al.

User Access Verification

pegas> show interface fxp0
Interface fxp0 is up, line protocol detection is disabled
  index 1 metric 0 mtu 1500 <UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
  inet broadcast
    input packets 464433, bytes 37492869, dropped 0, multicast packets 
    input errors 0
    output packets 44704, bytes 8968151, multicast packets 5
    output errors 0
    collisions 0

So, as I see, "line protocol detection is disabled" cause ospfd daemon 
to think that "fxp0 is down" ?

-------------- next part --------------
A non-text attachment was scrubbed...
Name: bazil.vcf
Type: text/x-vcard
Size: 117 bytes
Desc: not available
Url : http://lists.quagga.net/pipermail/quagga-users/attachments/20060406/7b03cb8f/bazil.vcf

More information about the Quagga-users mailing list