[quagga-users 7801] Re: ospf hangs to ExStart

Dalibor Toman dtoman at fortech.cz
Thu Nov 30 14:36:09 GMT 2006


Hi Pete,

On Monday, November 27, 2006 3:24 PM ,
Pete <nyfors at gmail.com> wrote:

>> Hi,
>> what could be wrong when exchangin routes via ospf with quagga and
>> cisco router? It worked normally at start but now it hangs to
>> ExStart state. Found out that it could have something to do with
>> MTU's but atleast "ip ospf mtu-ignore" didn't help. Anyone else had
>> this problem?
>> here's output from both routers for command "sh ip ospf neighbour"
>>
>>
>> Neighbor ID Pri State           Dead Time Address
>> Interface            RXmtL RqstL DBsmL
>> 172.16.0.1        1 ExStart/Backup    35.527s 172.16.0.1      eth1:
>> 172.16.0.5          0     0     0
>> Neighbor ID     Pri   State           Dead Time   Address
>> Interface 172.16.0.5        1   EXSTART/DR      00:00:38
>> 172.16.0.5 FastEthernet0/0

try to restart the OSPFD daemons after you changed important OSPF 
options (area type, etc) and to use quagga 99.5 from CVS

Regards
Dalibor Toman 




More information about the Quagga-users mailing list