[quagga-users 11034] Re: route ---- nat mode and routed mode
ratheesh.ksz at gmail.com
Tue Aug 18 14:44:12 IST 2009
what about qos rules on network interfaces ?
we have to apply iptables rules for only nat subnets ?
Can u just point me to some other important issues ?
On Tue, Aug 18, 2009 at 6:36 PM, Jack Carrozzo<jack at crepinc.com> wrote:
> Yes, but it's not related to quagga. Quagga doesn't "push any bits" as
> it were - the kernel does that. Quagga simply provides a platform for
> dynamic routing that tells the kernel where to push things.
> Generally if you just enable IP routing on the box, it will properly
> route between all the interfaces in a manner described by your routing
> table. Read your distro's docs on enabling NAT on the interfaces you
> -Jack Carrozzo
> On Tue, Aug 18, 2009 at 8:36 AM, ratheesh k<ratheesh.ksz at gmail.com> wrote:
>> i have a linux box (2.6.22) and is having 2 interfaces . eth0 and eth1
>> . currently i NAT traffic from lan to wan .
>> Can i use this as routed mode ( using ripd ) as well as nat at same time .?
>> Question in Detail : - i will connect 3 more network cards . eth2 ,
>> eth3 ,eth4 .
>> eth1 traffic should be nated to eth0 . But eth2 , eth3 and eth4 should
>> be in routed mode .. is it possible ?? Can u give me some more clue on
>> this ???
>> Quagga-users mailing list
>> Quagga-users at lists.quagga.net
More information about the Quagga-users