[quagga-users 12852] Re: configure ripd to listen on all active interfaces
Tyler J. Wagner
tyler at tolaris.com
Thu Apr 5 17:32:49 BST 2012
Of course, you should firewall this device. Right now your router will
insert routes sent to it from anything that speaks RIP, without authentication.
On 2012-04-05 17:25, Devin Bougie wrote:
> Hi Tyler,
> On Apr 5, 2012, at 12:00 PM, Tyler J. Wagner wrote:
>> On 2012-04-05 15:52, Devin Bougie wrote:
>>> Hi, All. Any recommendations for configuring ripd to listen on all active interfaces would be greatly appreciated.
>> Does this work (I'm not sure):
>> router rip
>> network 0.0.0.0/0
> Yes, it does. Thank you very much.
> For what it's worth, I had previously tried this on SL4 (RHEL4 - quagga 0.98.3) and SL5 (quagga 0.98.6) and it did not work. With your encouragement I've now tried it on SL6 ( quagga 0.99.15) and it does work. That's good enough for me.
> Here's our updated ripd.conf.
> ! -*- rip -*-
> hostname ripd
> !debug rip events
> !debug rip packet
> !debug rip zebra
> interface 0.0.0.0/0
> no ip rip authentication mode
> router rip
> network 0.0.0.0/0
> passive-interface default
> log file /var/log/quagga/ripd.log
> Thanks again,
"To have a child is to give fate a hostage."
-- John F. Kennedy
More information about the Quagga-users