[quagga-users 13009] Re: Fwd: Re: quagga and ip ro

"André Gustavo N. Lopes" andre at ondacorp.com.br
Tue Oct 23 14:34:18 BST 2012


I  would recommend you, to create loopback interfaces and config the
ospf adjacencies over them.

-- 
André Gustavo N. Lopes
Equipe TI Onda Empresas
Tel: +55(41)3331-8282
Fax: +55(41)3331-8256

Onda Empresas
www.ondaempresas.com.br
Serviços e Soluções em Data Center, TI e Telecom


"Este endereço de e-mail se destina exclusivamente ao uso profissional. Todo o conteúdo nele inserido é de responsabilidade exclusiva de seu remetente e não reflete, necessariamente, a opinião ou o ponto de vista oficial do Onda Provedor de Serviços S/A.

A mensagem, incluindo seus anexos, pode conter informações legais privilegiadas e/ou confidenciais, não podendo ser retransmitida, arquivada, divulgada ou copiada sem autorização expressa do remetente. Caso tenha recebido esta mensagem por engano, por favor, informe o remetente e em seguida apague-a do seu computador."

On 23/10/2012 10:42, Akhil Nair/TVM/TCS wrote:
> Hi list,
> I am working on OSPF.
> I am creating a setup which have 3 machines connected linearly.
>     192.168.3.0/24         192.168.4.0/24
> vm1-------------------vm2-----------------------vm3
>    eth1       rename2    eth1                 rename2
> I am able to get routes also in ospf routing table, after adding
> routes statically, which I can see with command "show ip ospf route".
> I am getting adjacency after adding the routes statically.Otherwise I
> am gettinfg stuck in Exstart state.
> I checked all possible way to troubleshoot checked mtu mismatch etc.
> But In general I am not able to get routes with ip ro command.
> And if i am trying to ping the 192.168.3.1 address(Vm1 eth1) from
> vm3(via rename2 192.168.4.2) its showing "network unreachable".
> I have used following configuration:-
>
> Machine name      Interface name       IP Address
> ----------------------------------------------------------
> Vm1           |    rename2         |     192.168.2.1/24
> Vm1           |       eth1         |     192.168.3.1/24
> Vm2           |    rename2         |     192.168.3.2/24
> Vm2           |       eth1         |     192.168.4.1/24
> Vm3           |    rename2         |     192.168.4.2/24
> Vm3           |       eth1         |     192.168.5.1/24
> ----------------------------------------------------------
> Please help me out.
>
> -----------------------------------------------------------------------------------------------
> replying to my earlier mail.
> I also checked with debug option also
>
> In log messages I am getting one line throughout
> This output is from Vm1 eth1 interface.
> Its -
> OSPF: **** sendmsg in ospf_write failed to 192.168.3.2, id 35395, off 0, len 52 , interface eth1, mtu 1500: Network is unreachable
>
>
> Thank you in advance.
>
> Regards
> Akhil Nair
>
> =====-----=====-----=====
> Notice: The information contained in this e-mail
> message and/or attachments to it may contain
> confidential or privileged information. If you are
> not the intended recipient, any dissemination, use,
> review, distribution, printing or copying of the
> information contained in this e-mail message
> and/or attachments to it are strictly prohibited. If
> you have received this communication in error,
> please notify us by reply e-mail or telephone and
> immediately and permanently delete the message
> and any attachments. Thank you
>
>
>
> _______________________________________________
> Quagga-users mailing list
> Quagga-users at lists.quagga.net
> http://lists.quagga.net/mailman/listinfo/quagga-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.quagga.net/pipermail/quagga-users/attachments/20121023/11a5b9d2/attachment.html>


More information about the Quagga-users mailing list