[quagga-users 14250] Re: Question about recovery failure function of OSPF protocol

Donald Sharp sharpd at cumulusnetworks.com
Wed Mar 9 13:49:04 GMT 2016


Jeongsook -

It's impossible for us to make any determination about what has gone wrong(
or right ) without some actual useful debugs.

donald

On Wed, Mar 9, 2016 at 4:01 AM, 박정숙 <jungsp at etri.re.kr> wrote:

>
>
> Dear all.
>
> I have a question about recovery function of OSPF protocol.
>
> I checked if this function works good.
>
>
>
> When I disconnected all of links on one node in the middle of the path
> (with ifdown ethx),
>
> I found that detour path were created.
>
> But when I connected those links again (with ifup ethx), I failed to check
> that these links are activated.
>
> I could not find these links in the neighbor DB.
>
>
> If you know the reason, please let me know.
>
> I'm not sure whether this is caused by Quagga source code or by
> configuration error.
>
>
> Thank you in advance.
>
>
> Best  regards,
>
> Jeongsook.
>
> _______________________________________________
> Quagga-users mailing list
> Quagga-users at lists.quagga.net
> https://lists.quagga.net/mailman/listinfo/quagga-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.quagga.net/pipermail/quagga-users/attachments/20160309/13138bd6/attachment.html>


More information about the Quagga-users mailing list