[quagga-users 14664] Re: bgp distance not updated in FIB

Preeti mpreetim at gmail.com
Tue Apr 11 23:21:21 BST 2017


Hi Paul

I am sorry for the delay.

Confirmed the following:
1. Both sides support route-refresh.
2. When I did soft-clear, the other side resent the whole table.

However, the route-table is not updated with the distance.

Mary



On Fri, Apr 7, 2017 at 1:30 AM, Paul Jakma <paul at jakma.org> wrote:

> On Tue, 4 Apr 2017, Preeti wrote:
>
> *I changed the BGP distance for eBGP to 30. However, it is not getting
>> updated in the FIB table. I did a 'soft' clear but it did not help.*
>>
>
> Do both sides support route-refresh? I.e., when you did the soft-clear,
> did the other send re-send all its routes?
>
> *Is there a way to update FIB with the correct distance without doing a
>> 'hard' reset and affecting traffic?*
>>
>
> If route-refresh was enabled, and the other side resent its whole table
> I'd have expected that to work as well as a hard clear. If refresh wasn't
> enabled, try having it enabled. If it was enabled, but you had this
> problem, that's odd...
>
> regards,
> --
> Paul Jakma | paul at jakma.org | @pjakma | Key ID: 0xD86BF79464A2FF6A
> Fortune:
> We've run out of licenses
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.quagga.net/pipermail/quagga-users/attachments/20170411/d36aed3e/attachment.html>


More information about the Quagga-users mailing list