[quagga-users 14646] Re: Problem compiling 1.2.0

Luca Maragnani luca.maragnani at gmail.com
Thu Mar 9 21:59:32 GMT 2017


Hi Richard,
this should work:

PKG_CONFIG_PATH=/usr/local/c-ares/lib/pkgconfig/ ./configure

Change the cares path to your specific installation.

Regards,
Luca

On Thu, Mar 9, 2017 at 5:36 PM, Templin, Fred L <Fred.L.Templin at boeing.com>
wrote:

> Just trying to help.
>
>
>
> As another clue, you may need to type “ldconfig” after you install
>
> the libcares  library. At least that is sometimes needed on Ubuntu;
>
> don’t know about slackware.
>
>
>
> Fred
>
>
>
> *From:* Richard J Palmer [mailto:richard at merula.net]
> *Sent:* Thursday, March 09, 2017 8:28 AM
> *To:* Templin, Fred L <Fred.L.Templin at boeing.com>
> *Cc:* quagga-users at lists.quagga.net
> *Subject:* RE: [quagga-users 14641] Problem compiling 1.2.0
> *Importance:* High
>
>
>
> I downloaded from source (this is slackware so no packages)
>
>
>
> What I need to know is *what* Quagga is looking for and we can then make
> sure it is there :)
>
>
>
> *Richard Palmer | Director | Merula Limited*
> *Company Registered in England and Wales No. 3243995*
> 5 Avro Court, Huntingdon, Cambridgeshire, PE29 6XS
> Phone 01480 222940 | Support 0845 330 0666
> Support Email support at merula.net
>
>
>
> --- Original message ---
> *Subject:* RE: [quagga-users 14641] Problem compiling 1.2.0
> *From:* "Templin, Fred L" <Fred.L.Templin at boeing.com>
> *To:* Richard J Palmer <richard at merula.net>, quagga-users at lists.quagga.net
> <quagga-users at lists.quagga.net>
> *Date:* Thursday, 09/03/2017 4:23 PM
>
>
> I ran into this same thing on Ubuntu 14.0.4. I fixed it by doing:
>
>
>
>   # apt-get install libc-ares-dev
>
>
>
> After installing the libc-ares-dev package, the quagga configure
>
> command worked fine.
>
>
>
> Hope this helps.
>
>
>
> Fred
>
>
>
> *From:* Richard J Palmer [mailto:richard at merula.net <richard at merula.net>]
> *Sent:* Wednesday, March 08, 2017 11:56 PM
> *To:* quagga-users at lists.quagga.net
> *Subject:* [quagga-users 14641] Problem compiling 1.2.0
> *Importance:* High
>
>
>
>  HI
>
>
>
> I am moving this separate from the BGP thread I had.
>
>
>
> I am trying to compile Quagga 1.2.0 on a Slakeware (14.1)
>
>
>
> However I am getting:
>
>
>
>
>
> --
>
> checking whether system has GNU regex... checking for regexec in -lc... yes
>
> checking for CARES... no
>
> configure: error: Package requirements (libcares) were not met:
>
>
>
> No package 'libcares' found
>
>
>
> Consider adjusting the PKG_CONFIG_PATH environment variable if you
>
> installed software in a non-standard prefix.
>
>
>
> Alternatively, you may set the environment variables CARES_CFLAGS
>
> and CARES_LIBS to avoid the need to call pkg-config.
>
> See the pkg-config man page for more details.
>
>
>
> ----
>
>
>
> This is with Slakeware 14.1 (it also seems to fail on 14.1)
>
>
>
> I have compiled / installed libcares but this has not as yet helped...
> Open to suggestions on what I am missing ...
>
>
>
> Thanks in advance
>
>
>
>
>
>
>
> *Richard Palmer | Director | Merula Limited*
> *Company Registered in England and Wales No. 3243995*
> 5 Avro Court, Huntingdon, Cambridgeshire, PE29 6XS
> Phone 01480 222940 | Support 0845 330 0666
> Support Email support at merula.net
>
>
>
>
>
> _______________________________________________
> Quagga-users mailing list
> Quagga-users at lists.quagga.net
> https://lists.quagga.net/mailman/listinfo/quagga-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.quagga.net/pipermail/quagga-users/attachments/20170309/823b7d56/attachment-0001.html>


More information about the Quagga-users mailing list